Care in embedded solution
Homepage
About us
Products
Solutions
Support
Contact us
产品中心
> 嵌入式主板
 >> 3.5" & EPIC
 >> Pico-ITX
 >> Mini-ITX

> ATX工业母板

> 网络应用平台
> 嵌入式无风扇工控机
> 机架式工控机
> 工业显示器
> 工业平板电脑
> 配件

Intel BayTrail J1900 Solution
MS-98F5

BayTrail MS-98F5  

Features:

  • Support Intel® Quad Core J1900 processor
  • Low power and fanless design
  • Support 6 COMs and 8 USB 2.0
  • Intel® Gen 7 graphics technology
MS-98F5 MS-98F5  


资料下载   说明书下载 User's Manual   最新BIOS下载 Data Sheet   支持CPU列表 Support CPU List   驱动下载 Driver

Specification
Processor CPU Intel® Bay Trail J1900 Processor
CPU Type BGA-1170 pin
Front Side Bus N/A
Chipset N/A
BIOS AMI 128Mbit SPI
Memory Technology
Dual-channel DDR3L 1066MHz (non-ECC)
Max. Capacity Up to 4GB
Socket 1 x 204-pin SO-DIMMs
Display Graphic Controller Within CPU
LVDS 1 (daul channel 24-bit)
eDP N/A
VGA 1
DVI N/A
HDMI N/A
DisplayPort N/A
Display Mode 2 independent displays supported
Ethernet Controller 1/2 x Realtek® 8111G
Audio Controller Realtek® ALC887 HD Audio Codec
Super I/O Controller Fintek F81866
H/W Monitor Watchdog Timer 255-level Watchdog Timer
Smart Fan Yes
TPM Controller 1 x 2*7-pin header for TPM module expansion
I/O Interface USB 8 x USB 2.0 (4 x internal; 4 x rear)
Serial
6 COM ports (COM1: rear; COM2~6: internal)
COM1: RS232, 5V/12V
COM2~6: RS-232 without power
Parallel 1 (box header)
PS/2 1 (box header)
GPIO 8 bits (4 x GPI; 4 x GPO)
Expansion Slot PCIe x 16 N/A
PCIe x 4 N/A
PCIe x 1 1
PCI N/A
Mni-PCIe 1
Storage SATA 1 x SATA 2.0
IDE N/A
eSATA N/A
CFast N/A
mSATA 1 (shared with Mini-PCIe slot)
CompactFlash N/A
Power Requirement Power Input DC-in 12V
Power Supply N/A
Environment Operating Temperature 0 ~ 60°C
Operating Humidity 10 ~ 90%, non-condensing
Storage Temperature -20 ~ 80°C
Storage Humidity 10 ~ 90%, non-condensing
Form Factor Dimensions 170mm x 170mm (Mini-ITX)
Weight 0.37 Kg
Regulatory Compliance EMC FCC, CE, C-Tick, VCCI, BSMI

典型应用:工业平板电脑;VCM设备...



版权所有©深圳市明宇达科技有限公司,粤ICP备17129549.
Copyright©2011 Shenzhen Mydtech Co.,Ltd. All Right Reserved.
Tel:+86 755 2834 5601,Fax:+86 755 2834 5600